Matters needing attention before concrete mixer working
1)Stationary concrete mixer need to be installed in foundation or chassis, and fixed with bolts.Mobile concrete mixer should be set up by four square timbers and make the body stable and firm without spring and tires force.Set up waterproof and heat insulation hangar by the season.
2)Transmission part should be equipped with protective cover.Adjust the loose tight degree of the triangle belt. And operating range should be kept dry and clean.
3)Check whether the clutch and brake are flexible and reliable or not, the wire has no broken, the track, the supporting wheel is good.There is no obstacle around of concrete mixer.Only after inspection, we can switch to start.
4)Lubricate the mechanical drive parts and check the adequacy of the lubricating oil.
5)Check whether the screws of each part are loosening or not and transmission part is too tight and killing case or not.
6)Check the concrete mixer's water supply and joint water storage device and water is good and smoothly or not.
Your position: 
